SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Inevitably, forklift components will eventually wear out and need replacing. The choice of buying new parts can become expensive so another idea is to purchase used parts. This could save a lot of money eventually. It is a good idea to obtain used lift truck components which have been remanufactured. These parts will ensure that you are getting components that will work for a long time and be productive.
Remanufacturing broken and worn out components is a more cost effective way in general compared to rebuilding. With rebuilding parts, just the components which are broken or worn out get replaced, which means that other wearable components may break down soon after purchase.
Remanufacturing on the other hand offers the best guarantee for used parts. Reproduced parts are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is one more reason why reproduced components overall function so much better. Whichever part within the part is new and this provides much longer life to the used part. Based on the forklift parts that are being redone, the cleaning process and the entire remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Different components of the engine like for instance rings, pistons, spark plugs, filters, valves, and valve springs can be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are pressure washed, disassembled and oven cleaned. A thorough inspection is performed to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts utilized on transmission components meet OEM specifications.
Certain forklift parts like for example the water pump, torque converters, the alternator, steer axles and the starter could be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can even be remanufactured with replacing all aged and worn out components. Unlike other forklift parts the control card could only have the worn and aged components replaced.
Remanufactured components are comprehensively checked upon reassembly to guarantee they are in top condition prior to being sold. It is essential when buying reproduced components to be certain they have undergone the proper testing and inspection procedures. On certain larger components such as steer axles, engines and transmissions, OEM specification replacement parts should be utilized.
The dealer of used lift trucks and parts could guarantee that the reproduced components have met OEM specifications and that these components meet industry standards. Lots of details go into remanufacturing second-hand parts. This attention to detail offers more serviceability out of remanufactured parts opposed to the components that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Auburn, Alabama
forkliftpartsauburn.com
Email Us
About Us